Generated by All in One SEO v5.0.1.1, this is an llms.txt file, used by LLMs to index the site.

# APM Testing

Advanced Plastic & Material Testing Laboratory

## Sitemaps

- [XML Sitemap](https://apmtesting.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [The A, B, C’s of choosing a Laboratory](https://apmtesting.com/the-a-b-cs-of-choosing-a-laboratory/) - [et_pb_section fb_built=”1″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.27.4″ link_text_color=”#6385BF” background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] There are a lot of different reasons you may need the help of a test laboratory but I am not going to cover those here. For now, let’s just start with the fact
- [APM Successfully renews A2LA laboratory accreditation for 30th consecutive year!](https://apmtesting.com/apm-successfully-renews-a2la-laboratory-accreditation-for-30th-consecutive-year/) - [et_pb_section fb_built=”1″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.27.4″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] As of November 15th, 2022, APM is proud to announce our continued dedication to providing quality testing services with the renewal of our A2LA accreditation to ISO 17025:2017. With this renewal APM extends its
- [Introduction to… Environmental Exposure Testing!](https://apmtesting.com/introduction-to-environmental-exposure-testing/) - [et_pb_section fb_built=”1″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.27.4″ link_text_color=”#6385BF” background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] First off, what is environmental exposure testing? Environmental exposure is the process of subjecting a part or material to a set of predefined conditions for a given duration. By exposing your product to
- [APM Testing, Inc. once again expands environmental exposure capabilities](https://apmtesting.com/apm-testing-inc-once-again-expands-environmental-exposure-capabilities/) - [et_pb_section fb_built=”1″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.24.0″ link_text_color=”#6385BF” background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Environmental exposure plays a critical role in the material and product development process. It allows us to gain insight into one of the most critical and elusive quality questions, “Will our product last?”.

## Pages

- [Home](https://apmtesting.com/) - APM Testing provides A2LA accredited laboratory services including material testing such as plastics testing, metal testing rubber testing, and more.
- [Testimonials](https://apmtesting.com/testimonials/) - Contact APM Testing at 607-257-8378 for a quote if you are looking material testing services including metal, plastics, circuit board testing and more.
- [Customer Feedback](https://apmtesting.com/customer-feedback/) - Contact APM Testing at 607-257-8378 for a quote if you are looking material testing services including metal, plastics, circuit board testing and more.
- [TablePress File Upload](https://apmtesting.com/tablepress-file-upload/) - Upload Your TablePress ZIP File Please use the form below to upload the ZIP file for Freshy Support. Once the upload is complete, reply to your existing support email thread to let us know. Your Email Address(Required) ZIP File(Required)Please upload the TablePress ZIP file here.Accepted file types: zip, Max. file size: 50 MB. Upload ZIP
- [ASTM D1238](https://apmtesting.com/test-methods/astm-d1238/) - Contact us today for Melt Flow Rate and Melt Flow Volume testing.
- [ASTM D1044](https://apmtesting.com/test-methods/astm-d1044/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1044 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Suface Abrasion [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” custom_padding=”||0px|||” global_colors_info=”{}”] This test method describes a procedure for estimating the resistance of transparent plastics to one kind of surface abrasion by measuring the change
- [ISO 179](https://apmtesting.com/test-methods/iso-179/) - Contact us for testing ISO 179, Charpy Impact.
- [ISO 75](https://apmtesting.com/test-methods/iso-75/) - Contact us for testing for Heat Deflection Temperature.
- [ASTM D2240](https://apmtesting.com/test-methods/astm-d2240/) - Contact us for ASTM D2240, ISO 48; Durometer A, D, and M Hardness.
- [ASTM G154](https://apmtesting.com/test-methods/astm-g154/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM G154 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] UV Exposure (QUV) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This practice covers the basic principles and operating procedures for using fluorescent UV light, and water apparatus intended to reproduce the weathering effects
- [ASTM G151](https://apmtesting.com/test-methods/astm-g151/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM G151 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] UV Exposure (General) [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] This practice provides general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources. Detailed
- [ASTM F606](https://apmtesting.com/test-methods/astm-f606/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM F606 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Mechanical Properties Of Fasteners [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners,
- [ASTM E1621](https://apmtesting.com/test-methods/astm-e1621/) - Contact us today for testing ASTM E1621, Elemental Analysis by X-Ray Fluorescence
- [ASTM E1348](https://apmtesting.com/test-methods/astm-e1348/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E1348 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Color, CIE L*a*b* Scale, Transmittance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] https://apmtesting.com/test-methods/astm-d2244/Purpose: This test method is used to measure color of a material in transmittance. Sample: Disc, 1.5-inch diameter or larger Price &
- [ASTM E1131](https://apmtesting.com/test-methods/astm-e1131/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E1131 TGA ANALYSIS TESTING SERVICES [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”][/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Measure the weight percentage of volatile components, combustible matter, and ash in a sample by continuously weighing the sample as it is heated through
- [ASTM D1004](https://apmtesting.com/test-methods/astm-d1004/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1004 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Tear Resistance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of the tear resistance of flexible plastic film and sheeting at very low rates of loading, 51 mm
- [ASTM E831](https://apmtesting.com/test-methods/astm-e831/) - Contact us for testing ASTM E831 Thermal Expansion by TMA.
- [ASTM E407](https://apmtesting.com/test-methods/astm-e407/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E407 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] Metal Microstructure Testing Services [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Etch a metal sample to reveal its microstructure per ASTM E407. Sample: One metal part. Price & Delivery: Contact us for a quote. Basic
- [ASTM E384](https://apmtesting.com/test-methods/astm-e384/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E384 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] Knoop Micro-Hardness Testing Services [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Measure the micro-hardness of a metal sample per ASTM E384. Sample: One sample 0.010 inches (0.25 mm) square or larger. Price & Delivery: Contact
- [ISO 37](https://apmtesting.com/test-methods/iso-37/) - Contact us today for testing Tensile Properties of Rubber (Strength, Elongation)
- [SAE J1128](https://apmtesting.com/test-methods/sae-j1128/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] SAE J1128 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Low-Tension Primary Cable (Except Ozone) [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] This standard covers low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V
- [SAE J423](https://apmtesting.com/test-methods/sae-j423/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] SAE J423 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Measuring Case Depth [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Case hardening may be defined as a process for hardening a ferrous material in such a manner that the surface layer, known as
- [ISO 11357](https://apmtesting.com/test-methods/iso-11357/) - Contact us for ISO 11357 DSC Analysis.
- [ISO 3451](https://apmtesting.com/test-methods/iso-3451/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ISO 3451 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Ash Content [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics (resins and compounds). The particular conditions
- [ISO 1183](https://apmtesting.com/test-methods/iso-1183/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ISO 1183 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Density [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] Specifies three methods for the determination of the density of non-cellular plastics in the form of void-free moulded or extruded objects, as well as
- [ISO 1133](https://apmtesting.com/test-methods/iso-1133/) - Contact us for Melt Flow Rate and Melt Volume Flow Rate testing.
- [ISO 306](https://apmtesting.com/test-methods/iso-306/) - Contact us for ISO 306 testing, Vicat Softening Point.
- [ISO 188](https://apmtesting.com/test-methods/iso-188/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ISO 188 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Heat Aging Of Rubber [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given: Method A: air-oven method using a
- [ASTM E1331](https://apmtesting.com/test-methods/astm-e1331/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E1331 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Color, CIE L*a*b* Scale, Reflectance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] Purpose: This test method is used to measure color of a material in reflectance. Sample: Disc, 1.5-inch diameter or larger Price &
- [ASTM E313](https://apmtesting.com/test-methods/astm-e313/) - Contact us today for testing IRHD Hardness, International Hardness.
- [ASTM E290](https://apmtesting.com/test-methods/astm-e290/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E290 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Bend Test (Except Guided Bend) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] These test methods cover bend testing for ductility of materials. Included in the procedures are four conditions of constraint on the
- [ASTM E112](https://apmtesting.com/test-methods/astm-e112/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E112 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Grain Size (Comparison Method) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||4px|||”] These test methods cover the measurement of average grain size and include the comparison procedure, the planimetric (or Jeffries) procedure, and
- [ASTM E18](https://apmtesting.com/test-methods/astm-e18/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E18 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] Rockwell Hardness Testing Services [/et_pb_text][et_pb_text _builder_version=”4.22.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Measure the Rockwell hardness of a metal sample per ASTM E18. Sample: One block 1 x 1 x 0.050 inches (25 x 25
- [ASTM E10](https://apmtesting.com/test-methods/astm-e10/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E10 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] Brinell Hardness Testing Services [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] APM Testing provides A2LA accredited services for Brinell hardness testing at a fair price, with prompt delivery, and a detailed test report. Our laboratory also
- [ASTM E8](https://apmtesting.com/test-methods/astm-e8/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM E8 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] Metal Tensile Testing Services [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Measure the strength of a metal in tension per ASTM E8. Sample: One (1) bar 8 x 1 x 0.1 inches or larger
- [ASTM E3](https://apmtesting.com/test-methods/astm-e3/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E3 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Preparation Of Metallographic Mounts [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] The primary objective of metallographic examinations is to reveal the constituents and structure of metals and their alloys by means of a
- [ASTM D6272](https://apmtesting.com/test-methods/astm-d6272/) - Contact us today for testing flexural strength and elongation by 4-point bending
- [ASTM D5630](https://apmtesting.com/test-methods/astm-d5630/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D5630 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Ash Content (Method B) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method was developed to determine the inorganic content of plastics by destructive ashing procedures. Ash levels of 0.01 % or
- [ASTM D4812](https://apmtesting.com/test-methods/astm-d4812/) - Contact us today for testing ASTM D4812, Unnotched Izod Impact.
- [ASTM D5420](https://apmtesting.com/test-methods/astm-d5420/) - Contact us to test for ASTM D5420 and ASTM D4226, Gardner Impact Resistance of Rigid Plastic.
- [ASTM D4587](https://apmtesting.com/test-methods/astm-d4587/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D4587 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] UV Exposure Of Paint and Coatings [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in fluorescent UV
- [ASTM D4329](https://apmtesting.com/test-methods/astm-d4329/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D4329 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] UV Exposure Of Plastics [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This practice covers specific procedures and test conditions that are applicable for fluorescent UV exposure of plastics conducted in accordance with Practices
- [ASTM D4226](https://apmtesting.com/test-methods/astm-d4226/) - Contact us to test for Gardner Impact Resistance of Rigid Plastic, ASTM D5420 and ASTM D4226 testing.
- [ASTM D4060](https://apmtesting.com/test-methods/astm-d4060/) - Contact us for testing Abrasion Resistance of Organic Coatings, ASTM D4060.
- [ASTM D3950](https://apmtesting.com/test-methods/astm-d3950/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D3950 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Nonmetallic Strapping [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This specification covers nonmetallic strapping and joining methods intended for use in closing, reinforcing, and bundling articles for shipment, unitizing, palletizing, and bracing for
- [ASTM D3574](https://apmtesting.com/test-methods/astm-d3574/) - Contact us for testing properties for flexible cellular urethane foam, ASTM D3574.
- [ASTM D3418](https://apmtesting.com/test-methods/astm-d3418/) - Contact us for glass transition and or melting point by DSC.
- [ASTM D3359](https://apmtesting.com/test-methods/astm-d3359/) - Contact us to test Coating Adhesion by Pressure Sensitive Tape, ASTM D3359.
- [ASTM D3330](https://apmtesting.com/test-methods/astm-d3330/) - Contact us today for testing ASTM D3330, Peel Adhesion of Pressure Sensitive Tape.
- [ASTM D3167](https://apmtesting.com/test-methods/astm-d3167/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D3167 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Floating Roller Peel [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] This test method covers the determination of the relative peel resistance of adhesive bonds between one rigid adherend and one flexible adherend
- [ASTM D2990](https://apmtesting.com/test-methods/astm-d2990/) - Contact us for Compressive Creep testing.
- [ASTM D2794](https://apmtesting.com/test-methods/astm-d2794/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D2794 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Impact Resistance Of Paint and Coatings [/et_pb_text][et_pb_text _builder_version=”4.20.2″ _module_preset=”default” global_colors_info=”{}”] This test method covers a procedure for rapidly deforming by impact a coating film and its substrate and for evaluating
- [ASTM D2584](https://apmtesting.com/test-methods/astm-d2584/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D2584 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Ignition Loss [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of the ignition loss of cured reinforced resins. This ignition loss can be considered to be the resin
- [ASTM D2583](https://apmtesting.com/test-methods/astm-d2583/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D2583 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Barcol Hardness [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” custom_padding=”||0px|||” global_colors_info=”{}”] This test method covers the determination of indentation hardness of both reinforced and nonreinforced rigid plastics using a Barcol Impressor, Model No. 934-1
- [ASTM D2244](https://apmtesting.com/test-methods/astm-d2244/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D2244 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Color, CIE L*a*b* Scale, Reflectance, Transmittance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] Purpose: This test method is used to measure color of polymers. This test can be done in reflectance or transmittance mode.
- [ASTM D1922](https://apmtesting.com/test-methods/astm-d1922/) - Contact us today for testing ASTM D1922, Tear Resistance, Elmendorf.
- [ASTM D1876](https://apmtesting.com/test-methods/astm-d1876/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1876 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] T-Peel Strength [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method is primarily intended for determining the relative peel resistance of adhesive bonds between flexible adherends by means of a T-type specimen.
- [ASTM D1824](https://apmtesting.com/test-methods/astm-d1824/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1824 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Brookfield Viscosity [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the measurement of plastisol and organosol viscosity at low shear rates. Price & Delivery: Contact us for a quote. Source: https://store.astm.org/d1824-24.html
- [Method Specifications](https://apmtesting.com/test-method-specifications/) - APM Testing provides material testing services by method specification including ASTM, ISO, AMS, PWA, IPC and more.
- [ASTM D1709](https://apmtesting.com/test-methods/astm-d1709/) - Contact us for ASTM D1709 testing, Dart Impact Resistance of Film.
- [ASTM D1708](https://apmtesting.com/test-methods/astm-d1708/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1708 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Tensile Strength and Tensile Elongation using Microtensile Specimens [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] Purpose: This test method is used to determine the tensile strength and elongation of plastic/polymer materials using microtensile specimens.
- [ASTM D1654](https://apmtesting.com/test-methods/astm-d1654/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1654 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Corrosion Creepback [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect
- [ASTM D1599](https://apmtesting.com/test-methods/astm-d1599/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1599 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Pressure Testing Of Plastic Pipe [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] This test method covers the determination of the resistance of either thermoplastic or reinforced thermosetting resin pipe, tubing, or fittings
- [ASTM D1525](https://apmtesting.com/test-methods/astm-d1525/) - Contact us for testing for Vicat softening point.
- [ASTM D1505](https://apmtesting.com/test-methods/astm-d1505/) - Contact us for your testing needs for ASTM D1505, Density of Plastics by Gradient Tube.
- [ASTM D1475](https://apmtesting.com/test-methods/astm-d1475/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1475 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Density Of Liquids [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.
- [ASTM D1415](https://apmtesting.com/test-methods/astm-d1415/) - Contact us today for testing IRHD Hardness, International Hardness.
- [ASTM D1414](https://apmtesting.com/test-methods/astm-d1414/) - Contact us for Physical Properties of Rubber O-Rings Testing.
- [ASTM D974](https://apmtesting.com/test-methods/astm-d974/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.27.6″ hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D974 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Acid Number, Petroleum Products [/et_pb_text][et_pb_text _builder_version=”4.27.6″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of acidic or basic constituents in petroleum products and lubricants soluble or nearly soluble
- [ASTM D903](https://apmtesting.com/test-methods/astm-d903/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D903 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Peel Strength, 180° [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of the comparative peel or stripping characteristics of adhesive bonds when tested on standard-sized specimens and under
- [ASTM D897](https://apmtesting.com/test-methods/astm-d897/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D897 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Tensile Properties Of Adhesive Bonds [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of the comparative tensile properties of the adhesive bonds of metal to metal when tested
- [ASTM D882](https://apmtesting.com/test-methods/astm-d882/) - Contact us for Tensile Properties of Film testing.
- [ASTM D865](https://apmtesting.com/test-methods/astm-d865/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D865 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Oven Aging — Closed Container [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method describes a procedure to determine the deterioration induced by heating rubber specimens in individual test tube enclosures with
- [ASTM D790](https://apmtesting.com/test-methods/astm-d790/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] ASTM D790 – PLASTIC FLEXURAL TESTING SERVICES [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”][/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Measure the flexural strength and flexural modulus of a rigid plastic per ASTM D790. Sample: Seven (7) bars, 5 x 0.5 x 0.125
- [ASTM D785](https://apmtesting.com/test-methods/astm-d785/) - Contact us for Rockwell Hardness testing.
- [ASTM D732](https://apmtesting.com/test-methods/astm-d732/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D732 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Shear Strength By Punch Tool [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the punch-type of shear test and is intended for use in determining the shear strength of test
- [ASTM D695](https://apmtesting.com/test-methods/astm-d695/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D695 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Compressive Properties Of Plastics [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in
- [ASTM D638](https://apmtesting.com/test-methods/astm-d638/) - Contact us to test ASTM D638 for tensile properties (strength, elongation, and or modulus) of rigid plastic and composite materials.
- [ASTM D610](https://apmtesting.com/test-methods/astm-d610/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D610 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Evaluating Degree Of Rusting [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This practice covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of
- [ASTM D573](https://apmtesting.com/test-methods/astm-d573/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D573 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Air Oven Deterioration [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method covers a procedure to determine the influence of elevated temperature on the physical properties of vulcanized rubber. The results of
- [ASTM D542](https://apmtesting.com/test-methods/astm-d542/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D542 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Index Of Refraction [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] This test method covers a procedure for measuring the index of refraction of transparent organic plastic materials. Source: https://store.astm.org/d0542-22.html [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]
- [ASTM D523](https://apmtesting.com/test-methods/astm-d523/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D523 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Specular Gloss (20°, 60°, 85°) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] This test method covers the measurement of the specular gloss of nonmetallic specimens for glossmeter geometries of 60, 20, and
- [ASTM D445](https://apmtesting.com/test-methods/astm-d445/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D445 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Kinematic Viscosity [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||1px|||”] This test method specifies a procedure for the determination of the kinematic viscosity, ν, of liquid petroleum products, both transparent and opaque, by
- [ASTM D395](https://apmtesting.com/test-methods/astm-d395/) - Contact us for Compression Set testing.
- [ASTM D374](https://apmtesting.com/test-methods/astm-d374/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D374 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Thickness Of Insulation (Method A-C) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] These test methods cover the determination of the thickness of several types of solid electrical insulating materials employing recommended techniques. Price
- [ASTM D256](https://apmtesting.com/test-methods/astm-d256/) - Contact us for Izod Impact testing.
- [ASTM D150](https://apmtesting.com/test-methods/astm-d150/) - Contact us today for testing ASTM D150, Permittivity (Dielectric Constant), Dissipation Factor.
- [ASTM D149](https://apmtesting.com/test-methods/astm-d149/) - Contact us for Dielectric Strength Testing.
- [ASTM C1147](https://apmtesting.com/test-methods/astm-c1147/) - Contact us today for Tensile Weld Strength testing.
- [ASTM B678](https://apmtesting.com/test-methods/astm-b678/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM B678 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Solderability of Plated Products [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This test method provides a procedure for evaluating the solderability of metallic-coated products and test specimens to assure satisfactory performance in manufacturing
- [ASTM B571](https://apmtesting.com/test-methods/astm-b571/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM B571 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Adhesion of Platings (except Draw Test) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] This practice covers simple, qualitative tests for evaluating the adhesion of metallic coatings on various substances. Price & Delivery: Contact
- [ASTM B557](https://apmtesting.com/test-methods/astm-b557-tensile-testing/) - This test method is used for Tensile Testing of Aluminum and Magnesium Alloys (Yield, Elongation)
- [ASTM B487](https://apmtesting.com/test-methods/astm-b487-coating-thickness/) - Contact us for Plating Thickness by Cross Section/X-Section.
- [ASTM B117](https://apmtesting.com/test-methods/astm-b117-salt-spray/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM B117 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Salt Fog Testing / Salt Spray [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] This practice covers the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Price
- [ASTM A370](https://apmtesting.com/test-methods/astm-a370/) - Contact us for Steel Testing Methods (except Charpy Impact) Tension / Bend / Hardness.
- [ASTM-A247](https://apmtesting.com/test-methods/astm-a247/) - Contact us for ASTM A247 Graphite Microstructure Testing Services.
- [ASTM D4459](https://apmtesting.com/test-methods/astm-d4459/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D4459 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Xenon Arc Exposure of Plastics for Indoors Applications [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}” custom_padding=”||0px|||”] Purpose: This practice is intended to reproduce the weathering effects that occur when materials are exposed to solar
- [Quality and Accreditations](https://apmtesting.com/accreditations/) - APM Testing is a A2LA accredited and ISO 17025 certified material testing lab. We are also a aerospace and bombardier approved supplier.
- [Industries APM Serves](https://apmtesting.com/industries-apm-serves/) - APM Testing is an ISO 17025 certified material testing lab serving industries including auto, municipal, R & D, aerospace, consumer products and rail/train.
- [News/Articles](https://apmtesting.com/news-articles/) - Check out our news articles to stay updated with our ISO 17025 credited material testing lab and to learn more about the services offer.
- [About Us](https://apmtesting.com/about-us/) - APM Testing is a A2LA accredited and ISO 17025 certified material testing lab providing services for the testing of metals, plastics, circuit boards and more.
- [Composites Testing](https://apmtesting.com/materials-tested/composites-testing/) - APM Testing is an A2LA accredited composites testing lab providing services for chemical analysis, mechanical and electrical testing, and material certifications.
- [Metal Testing](https://apmtesting.com/materials-tested/metal-testing/) - APM Testing is an A2LA accredited metal testing lab. We test the chemical, mechanical, metallographic, material certification and failure analysis of metal.
- [Circuit Board Testing](https://apmtesting.com/materials-tested/circuit-board-testing/) - APM Testing is an A2LA accredited circuit board testing lab providing services for for cross sectional analysis, dimensional measurement, and chemical analysis.
- [Foam and Rubber Testing](https://apmtesting.com/materials-tested/foam-and-rubber-testing/) - APM Testing is an ISO 17025 certified rubber testing lab providing services for mechanical, chemical, and performance testing of rubber materials.
- [Paint & Coating Testing](https://apmtesting.com/materials-tested/paint-coating-testing/) - APM Testing is an ISO 17025 certified paint and coating testing lab providing services for physical properties, chemical analysis, and material certification.
- [Contact Us](https://apmtesting.com/contact-us/) - Contact APM Testing at 607-257-8378 for a quote if you are looking material testing services including metal, plastics, circuit board testing and more.
- [ASTM D1003](https://apmtesting.com/test-methods/astm-d1003/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1003 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Haze & Luminous Transmittance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”] Purpose: This test method is used to measure a specific light-transmitting and wide-angle-light-scattering properties of transparent plastic. Sample: Disc, 1.5-inch diameter or larger Price
- [ASTM G155](https://apmtesting.com/test-methods/astm-g155/) - Contact us today for testing Xenon Arc Exposure Testing
- [AMS 3667](https://apmtesting.com/test-methods/ams-3667/) - Contact us today for PTFE Sheet Testing
- [AMS 7276](https://apmtesting.com/test-methods/ams-7276/) - Contact us today for testing Fluorocarbon Elastomer (FKM)
- [AMS 7287](https://apmtesting.com/test-methods/ams-7287/) - Contact us today for testing IRHD Hardness, International Hardness.
- [ASTM D621](https://apmtesting.com/test-methods/astm-d621/) - Contact us today for testing Deformation Under Load
- [ASTM D3308](https://apmtesting.com/test-methods/astm-d3308/) - Contact us today for testing IRHD Hardness, International Hardness.
- [AMS 3660](https://apmtesting.com/test-methods/ams-3660/) - Contact us today for testing AMS 3660, PTFE Sheet, Rod Testing.
- [AMS 3656](https://apmtesting.com/test-methods/ams-3656/) - Contact us today for testing AMS 3656, PTFE Tubing, Rod, and Sheet
- [AMS 3653](https://apmtesting.com/test-methods/ams-3653/) - Contact us today for testing Flexible PTFE Tubing, Electrical Insulation
- [ASTM D2000](https://apmtesting.com/test-methods/astm-d2000/) - Contact us for classification of rubber products for automotive applications.
- [ASTM D1894](https://apmtesting.com/test-methods/astm-d1894/) - Contact us for Coefficient of Friction testing.
- [ASTM D792](https://apmtesting.com/test-methods/astm-d792/) - Contact us for Density and Specific Gravity testing.
- [ASTM D648](https://apmtesting.com/test-methods/astm-d648/) - Contact us for Heat Deflection Temperature, Method B testing.
- [ASTM D471](https://apmtesting.com/test-methods/astm-d471/) - Contact us for Effect of Liquids on Rubber Property testing
- [ASTM D412](https://apmtesting.com/test-methods/astm-d412/) - Contact us for Tensile Properties testing.
- [ASTM D297](https://apmtesting.com/test-methods/astm-d297/) - Contact us for Density of Rubber testing.
- [ASTM D115](https://apmtesting.com/test-methods/astm-d115/) - Contact us for Dielectric Strength of Varnish testing.
- [ASTM D3039](https://apmtesting.com/test-methods/astm-d3039/) - Contact us today for testing ASTM D3039, Tensile Properties of Composite Materials.
- [ASTM D4212](https://apmtesting.com/test-methods/astm-d4212/) - Contact us today for testing ASTM D4212, Viscosity by Zahn Cup.
- [AMS 2491](https://apmtesting.com/test-methods/ams-2491/) - Contact us today for PTFE Surface Treatment Testing.
- [ASTM D1675](https://apmtesting.com/test-methods/astm-d1675/) - Contact us today for testing Dielectric Strength, Dielectric Breakdown Voltage, ASTM D1675.
- [ASTM B748](https://apmtesting.com/test-methods/astm-b748-plating-thickness-sem/) - Contact us for Plating Thickness by SEM.
- [ASTM B244](https://apmtesting.com/test-methods/astm-b244/) - Contact us today for Coating Thickness by Eddy Current.
- [ISO 180](https://apmtesting.com/test-methods/iso-180/) - Contact us to test for ISO 180. Izod Impact.
- [ASTM D2197](https://apmtesting.com/test-methods/astm-d2197/) - Contact us for Scrape Adhesion of Organic Coatings. Contact us for Scrape Adhesion of Organic Coatings.
- [ASTM D4591](https://apmtesting.com/test-methods/astm-d4591/) - Contact us for fluoropolymer materials melting point testing.
- [ASTM E1545](https://apmtesting.com/test-methods/astm-e1545/) - Contact us for glass transition testing.
- [ISO 11359](https://apmtesting.com/test-methods/iso-11359/) - Contact us for Thermal Expansion, Glass Transition by TMA.
- [ASTM D570](https://apmtesting.com/test-methods/astm-d570/) - Contact us for water absorption of plastics.
- [ASTM B568](https://apmtesting.com/test-methods/astm-b568-plating-thickness-xrf/) - ASTM B568 is a non-destructive measure to find the thickness of a metallic plating.
- [ASTM D624](https://apmtesting.com/test-methods/astm-d624/) - Contact us for ASTM D624 testing, Tear Resistance Die B, Die C.
- [Plastics Testing](https://apmtesting.com/materials-tested/plastics-testing/) - APM Testing is an A2LA accredited plastics testing lab providing services for chemical and failure analysis and mechanical and electrical testing of plastics.
- [ASTM D257](https://apmtesting.com/test-methods/astm-d257/) - Contact us for testing ASTM D257, Surface and Volume Resistivity.
- [ASTM E1252](https://apmtesting.com/test-methods/astm-e1252/) - We offer ASTM E1252 testing and more. Contact us for more information.
- [ASTM E1508](https://apmtesting.com/test-methods/astm-e1508-sem-eds/) - This is a general guideline for labs utilizing EDS (energy-dispersive spectroscopy) to analyze the elements present in various materials.
- [SEM/EDS ANALYSIS](https://apmtesting.com/test-methods/sem-eds-manual/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”] SEM/EDS ANALYSIS – SEM TESTING SERVICES [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” locked=”off” global_colors_info=”{}”][/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Purpose: Generates images of samples at magnifications up to 100,000X. Sample: Any solid sample one cubic inch or smaller. Price & Delivery: Contact us for a
- [Chemical Properties](https://apmtesting.com/test-methods/chemical-properties/) - APM Testing provides chemical property tests as part of our material testing services that include help determining metal chemistry, chemical resistance, and more.
- [Material Specification](https://apmtesting.com/test-methods/material-specification/) - APM Testing provides material specification certification tests to ensure certification of parts and materials to various industry specifications.
- [Materials We Can Test](https://apmtesting.com/materials-tested/) - APM Testing is an iso-certified material testing lab. We do provide all types of material testing including metals, plastics rubbers, circuit boards and more.
- [FAQ](https://apmtesting.com/faq/) - Have questions about our material testing services? Check out our answers to our most frequently asked questions.
- [ISO 178](https://apmtesting.com/test-methods/iso-178/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ISO 178 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Flexural Properties Of Plastic [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] The principle of the method specified is to deflect the test specimen, supported as a beam, at constant rate at
- [ISO 527](https://apmtesting.com/test-methods/iso-527/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ISO 527 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Tensile Properties Of Plastic [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Several different types of test specimen are defined to suit different types of material. The methods specified are selectively suitable
- [ASTM E1004](https://apmtesting.com/test-methods/astm-e1004/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM E1004 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Electrical Conductivity [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method covers a procedure for determining the electrical conductivity of nonmagnetic metals using the electromagnetic (eddy-current) method. The procedure has
- [ASTM D953](https://apmtesting.com/test-methods/astm-d953/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D953 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Bearing Strength [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method covers the determination of the bearing strength of rigid plastics in either sheet or molded form. Procedure A is
- [ASTM D618](https://apmtesting.com/test-methods/astm-d618/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D618 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Conditioning Plastics [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] In general, the physical and electrical properties of plastics are influenced by temperature and relative humidity in a manner that materially affects
- [ASTM D543](https://apmtesting.com/test-methods/astm-d543/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D543 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Chemical Resistance [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] These practices cover the evaluation of all plastic materials including cast, hot-molded, cold-molded, laminated resinous products, and sheet materials for resistance to
- [ASTM D3354](https://apmtesting.com/test-methods/astm-d3354/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D3354 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Blocking Load of Film (Method B) [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic
- [ASTM D3012](https://apmtesting.com/test-methods/astm-d3012/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D3012 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Oxidative Stability [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method provides a means for estimating the resistance of polypropylene, in molded form, to accelerated aging by heat in the
- [ASTM D1781](https://apmtesting.com/test-methods/astm-d1781/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1781 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Drum Peel Testing [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method covers the determination of the peel resistance of adhesive bonds between: a relatively flexible adherend and a rigid
- [ASTM D1002](https://apmtesting.com/test-methods/astm-d1002/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM D1002 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Lap Shear Strength Of Metal [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method covers the determination of the apparent shear strengths of adhesives for bonding metals when tested on a
- [ASTM B578](https://apmtesting.com/test-methods/astm-b578/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASTM B578 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Microhardness of Platings [/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This test method covers the determination of the hardness of metallic coatings upon various substrates. The measurements are made with the
- [ASM HANDBOOK](https://apmtesting.com/test-methods/asm-handbook/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] ASM Handbook [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Failure Analysis / Fractography / Corrosion Analysis / Fracture Examination / Metallographic Mounts / Microstructure / Microstructural Analysis [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] APM Testing
- [GDS Manual](https://apmtesting.com/test-methods/gds-manual/) - [et_pb_section fb_built=”1″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ locked=”off” global_colors_info=”{}” sticky_enabled=”0″] GDS – CHEMICAL ANALYSIS OF METAL TESTING SERVICES [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ locked=”off” global_colors_info=”{}” sticky_enabled=”0″] GDS is a method for quantitative chemical analysis of the elements in a metal sample. [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Purpose:
- [SAE J419](https://apmtesting.com/test-methods/sae-j419/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] SAE J419 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Measuring Decarburization [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] This report covers the recommended practice for the evaluation and measurement of decarburization in ferrous material. Included are
- [ISO 3795](https://apmtesting.com/test-methods/iso-3795/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] ISO 3795 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Flammability [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Specifies a method for determining the horizontal burning rate of materials used in the occupant compartment of vehicles, after
- [ASME-B46.1](https://apmtesting.com/test-methods/asme-b46-1/) - [et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] ASME B46.1 [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] Surface Roughness Analysis [/et_pb_text][et_pb_text _builder_version=”4.18.0″ _module_preset=”default” global_colors_info=”{}”] This Standard is concerned with the geometric irregularities of surfaces. It defines surface texture and its constituents: roughness, waviness, and lay. It also
- [Flammability](https://apmtesting.com/test-methods/flammability/) - APM Testing provides flammability tests that include help determining the flammability to various ASTM, ISO, FMVSS and UL specifications.
- [Electrical Properties](https://apmtesting.com/test-methods/electrical-properties/) - APM Testing provides electrical property tests as part of our material testing services that include help determining resistance, dielectric strength and more.
- [Environmental Exposure](https://apmtesting.com/test-methods/environmental-exposure/) - APM Testing provides environmental exposure tests including exposing your samples to temperature, humidity, UV, salt spray, and thermal cycling conditions.
- [Thermal Properties](https://apmtesting.com/test-methods/thermal-properties/) - APM Testing provides thermal property tests as part of our material testing services that include help determining melting point, glass transition and much more.
- [Mechanical Properties](https://apmtesting.com/test-methods/mechanical-properties/) - APM Testing provides mechanical property tests as part of our material testing services. These include tensile, elongation, flexural, compressive, and more.
- [Physical Properties](https://apmtesting.com/test-methods/physical-properties/) - APM Testing provides physical property tests as part of our material testing services. These include density, hardness, abrasion resistance, adhesion and more.
- [Types of Material Tests We Perform](https://apmtesting.com/test-methods/) - APM Testing provides an array of material testing services including physical, mechanical, chemical properties, environmental exposure, flammability, and more.

## Categories

- [Blog](https://apmtesting.com/category/blog/)